Close



Results 1 to 3 of 3

Thread: Wrecked printer

  1. #1

    Wrecked printer

    Hi.

    I have two printers. Massportal Pharaoh Ed and cheaper Alfawise U10.

    Unfortunately i broke my U10. Heater wires connect accidentaly to bedtemp sensor. Now Controllunit shows all the time bedtemp to 104C.
    If I'm right, i proke somethin from motherboard. Where or how do i get new one with current software?
    I have bought this printer when it was allready builded up, so I don't have any experience of that.

    Thans for a understanding a newbie.

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    replace the thermistor on the bed first.
    It's quite likely that's all that's died.
    It's a cheap part and should be fairly easy to replace.

  3. #3
    Quote Originally Posted by curious aardvark View Post
    replace the thermistor on the bed first.
    It's quite likely that's all that's died.
    It's a cheap part and should be fairly easy to replace.
    Thermistor fault is out counted.
    If thermistor connector is disconnected, temp value is same. There is no way to affect temp value with resistive changes in bed temp connector.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •