Close



Results 1 to 7 of 7

Threaded View

  1. #1

    Look at my print and tell me what's wrong :)

    Printed on Ender 5 Pro, with PLA at 200 degrees. Retraction at 5mm, layer-heigh 2.8.The print has a flat base of 5mm, and then the two sides go up for about 25cm, slanting backwards. Printed standing on its base.The print is overall ok, but 2 flaws:- The top-layer of the base has some random potmarks in it (There are 6 proper holes, designed to be there)- The first couple of centimeters of the sides don't have solid walls. But above that, they are suddenly fine.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •