Close



Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19
  1. #11
    Student
    Join Date
    Apr 2021
    Location
    poland
    Posts
    9
    This milwaukee part will be cut few mm below "red parts",
    Attachment 16335
    and connected to other brand batteries
    Zrzut ekranu 2021-05-2 o 16.05.28.jpg
    what finally give me something like this
    Zrzut ekranu 2021-05-2 o 16.08.00.jpg


    The point is I have few new milwaukee tools and one milwaukee battery, while I have a dozen or so other brand batteries. So this top part (milwaukee) should work like original or very similar.

  2. #12
    I've posted to reddit looking for a solution to the "tunnel" question, but so far there has been no response. I'm a bit disappointed, but it could be that it's the weekend and perhaps suitable answers will appear when people return to work on Monday. I suspect that once the tunnel problem is solved, I'll have to join the fore and aft sections with an additional block, use that to cut a new channel through from front to rear (which will automatically create the tunnel) and then split the joined sections to allow for springs to be inserted and to allow for travel left and right.

  3. #13
    Student
    Join Date
    Apr 2021
    Location
    poland
    Posts
    9
    I've found how m18 battery looks inside

    https://youtu.be/cawrRuSCoVY?t=180

  4. #14
    That was an enlightening video. I'm amused at the spring sound as the top is removed. It sounds like "it's going to be difficult to put those springs back together!" Perhaps not. You have the advantage that you don't need the lower part and the clearance shown in the video. That means the two moving parts can be split into four and then rejoined to form something that works the same way as that shown in the video.

  5. #15
    Student
    Join Date
    Apr 2021
    Location
    poland
    Posts
    9
    Found more

  6. #16
    I'd forgotten about this "project" as other, higher priority matters have recently arisen. Did you find any engineering drawings to go along with that beautifully exploded part image collection?

  7. #17
    Student
    Join Date
    Apr 2021
    Location
    poland
    Posts
    9
    Quote Originally Posted by fred_dot_u View Post
    I'd forgotten about this "project" as other, higher priority matters have recently arisen. Did you find any engineering drawings to go along with that beautifully exploded part image collection?
    Unfortunately no

  8. #18
    Student
    Join Date
    Apr 2021
    Location
    poland
    Posts
    9
    fred_dot_u, do you have any progress?

  9. #19
    unfortunately no but I am feeling better and may be able to proceed in the next day or two

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •