Surplus Threads in Print

[sonnichs]

A picture is worth 1000 words. I often see these "threads" appearing in a print. They are, I assume, due to the print head continuing to exude plastic is it makes rapid transitions about the piece.I am still playing with it but am open to suggestion. My expectation is that the plastic is too "fluid" at 210 degrees and keeps dripping when it should not. Reducing temperature however has other effects such as bed adhesion issues. I checked with the vendors (SUNLU, Techbears) and I am within their temperature specs. Other thoughts--the GCODE is making transitions that I don't quite understand-a more contiguous pattern would be nice. I have seen GCODE that does a slight retraction during transition's. I don't see that in this code (from Fusion).Ideas welcome!fritz