Hi y'all,

I thought some people here might be interested in my latest 3D printer build. Several years a go I built a delta 3D printer that didn't work so well, had lots of slop and wasn't very rigid and had poor print quality. I was determined this time to make a much better printer and I think I did a pretty decent job on it.

I kept getting errors when trying to upload photos so for now here's a short YouTube video showing a bit of the build:


If you're interested in a more deep dive on how I built it and more photos you can find a detailed write-up on my blog:
https://www.joshendyblog.net/big-3d-printer-bfp/

Cheers,
Josh