Close



Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 36
  1. #21
    i am printing with pla 1.75 filament and i dont know how to do a temp tower

  2. #22
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,141
    Add Roberts_Clif on Thingiverse
    That is a fairly high temperature for Printing PLA filament.

  3. #23
    I am using 1.75mm pla and i dont know how to do a temp tower

  4. #24
    sry for posting twice
    what temp should i print at

  5. #25
    and how would i do a temp tower

  6. #26
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,141
    Add Roberts_Clif on Thingiverse
    Using Cura load a temp tower like this one on thingiverse
    https://www.thingiverse.com/thing:2493504

    Then Using tweak At Z-3.0.1 with Cura I find where the layer temp increase and using that layer enter in tweak At Z-3.0.1.
    This means that I will be using 8 tweak At Z-3.0.1 for the 8 temperature changes.

    The temperature is usually printed on the roll of filament.
    On My machine I print PLA between 196- 206
    Though printing a temp tower will show you the best filament temperature.
    Last edited by Roberts_Clif; 11-03-2020 at 06:07 AM.

  7. #27
    can you find me a video

  8. #28
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,141
    Add Roberts_Clif on Thingiverse

  9. #29
    The nozzle looked like it was not dispensing fast enough

  10. #30
    Staff Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    1,141
    Add Roberts_Clif on Thingiverse
    Nozzles have to be replaced once in a while they are in the list of consumables, though you may need increase the hot-end temperature for your filament.

    Do you hear clicking, this could be a sign of the filament slipping causing under extrusion.

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •