Hello,
I was wondering if someone could assist.
I have an Ender 3v2 and today have done my first print from the stl file and used a new filament from Print-me.
I sliced the print using Cura (i used the same profile as Ender 3 pro), set the bed temp to 60 degrees, nozzle to 200, converted all to gcode and started printing. This is what started coming out:
IMG-20201016-WA0003.jpg
Can you advise why it is so uneven and it is not printing all the way to the holes, but leaves a gap?

Thanks in advance