Close



Results 1 to 4 of 4
  1. #1

    Unsmooth, harsh resolution

    Hello,

    I have made a design in TinkerCad which looks smooth. I transfered it to Cura and the finished product in the preview and after printing has bad quality. It looks like the infill pattern has surfaced.

    The printing resolution was Super Quality - 0,12mm. I have not experienced such bad quality before.
    What might be the problem?







  2. #2
    Engineer-in-Training
    Join Date
    Jul 2020
    Location
    Monterey Bay, California
    Posts
    368
    Add jamcultur on Thingiverse
    That doesn't look like the infill pattern. It looks more like underextrusion. It might help to know what kind of printer, what kind of filament, print temperature, etc.

  3. #3
    I am using Creality CR10S.
    The filament is SAKATA. I printed it at 220 Celsius.
    Today i printed again at 210 Celsius with no noticeable differences.
    I experimented with a flow rate of 100% and 105%. No big differences.



    Actually, if you look at the sliced previw by Cura, it looks almost like the print (not smooth as it should). Is it an error from the slicer/

  4. #4
    you can try more top layers. Or you can try solid printing - ie: no infill pattern just solid plastic. cookie clicker

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •