Close



Results 1 to 3 of 3

Thread: Makerbot Sketch

  1. #1

    Makerbot Sketch

    Hello All!Does anyone have experience with the Makerbot Sketch for their classrooms? My school wants to buy another printer and they are offering a tempting package to schools with curriculum and training but I know some people in the community don't seem to like Makerbot. Are there any other printers people enjoy in their classroom? I'm looking for workhorses, nothing too fancy just something I can efficiently crank out a bunch of prints from students for under $1000. A heated bed, leveling help, and cloud printing are a plus.

  2. #2
    I don't know about Makerbot, but for your price, the Prusa MK3 is likely to be a good choice. Our public library has had a MK2 for quite some time and it's been as reliable as anyone could hope, especially since it's been in a public area. They do have extreme supervision on the machine, which probably plays a big part, but it has heated bed, mesh leveling and a great support structure. Not so sure about cloud printing though.

    Get the kit, save some bucks and have a build project out of it as well. The kit is extremely easy to build and there is a good set of build instructions on Prusa's site.

  3. #3
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    7,974
    makerbot - while the company that pioneered desktop 3d printing. Just aren't the brand they used to be.

    Now one of the problems you will have putting a 3d printer in a school - is the health and safety.
    I suspect you will need an enclosed print volume so that the kiddies don't burn their sticky little fingers poking the hot nozzle.

    If I were you - and looking. I'd be looking at qidi.
    As most of their printers are enclosed.
    so machines to have alook at:
    X-plus: https://www.amazon.com/Intelligent-I...s%2C699&sr=8-3

    Or the slightly smaller x-pro - you could afford 2 of those :-) https://www.amazon.com/Function-Extr...s%2C699&sr=8-5

    The makerbot sketch has a very small print volume: 150x150x150mm
    The qidi x-pro by comparison is: 230x150x150mm
    The x-plus is: 270x200x200mm

    And if you really wanted to push the boat out and use the whole $1000 (well $977.50 anyway) the x-Max is:
    300x250x300mm
    https://www.amazon.com/dp/B07JBXVCWG/ref=emc_b_5_t

    All three are MUCH better machines that the makerbot. qidi has an excellent reputation for support, build quality and reliabuility.
    And all their machines are fully enclosed.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •