Ender 3 Print

[DavaX]

Hello guys


In some spots it makes infill (lines) can i fix this


https://imgur.com/xFcmt2a

[curious aardvark]

it's because the model is not an even thickness all the way round.
so at those points the gap is too narrow for a full extrusion line and the slicer has to fill in that way.

It makes absolutely no difference to the final model - and often that kind of gap fill is stronger than a single extrusion line.

But basically it's down to different wall thicknesses in the actual model.

[DavaX]

Thanks allot ! for fast reply !!