Results 1 to 1 of 1
Thread: Setting Z Axis End Stop
-
09-04-2020, 12:31 PM #1
- Join Date
- Nov 2019
- Posts
- 1
Setting Z Axis End Stop
Hi every1
This question is probably asked several times.
How do you set the Z axis end stop ? Do you guys put the nozzle tip on the printing surface and set the Z axis end stop or do you slide a feeler gauge of 0.2mm under the tip and set the end stop there ?
Thank you for the help !
Alex
Extruder not feeding during print,...
Today, 01:59 AM in Tips, Tricks and Tech Help