Close



Results 1 to 2 of 2
  1. #1
    Student Rodrigo's Avatar
    Join Date
    Apr 2020
    Location
    Portugal
    Posts
    2
    Follow Rodrigo On Twitter Add Rodrigo on Thingiverse

    Fusion360 help needed to mount 3d prints onto Snare Drums

    Howdie,

    I'm a musician and artist who has been using 3d-printing to modify and mount things to musical instruments. Although I'm a novice, I've manage to design most of the things I've needed, but have struggled with some of the mechanical-side of things. Specifically on how to attach my prints to a drum.

    Here are a couple of the designs I've made, along with my current solution to mounting things (scrunchies!):
    IMG_0100.jpgIMG_9458.jpg

    The scrunchies work pretty well, particularly since this stuff doesn't need too much structural stability, but they lose their tension over time and look a bit shit too. I've tried sketching some ideas with screws and springs, but I really lack the imagination and knowledge when it comes to 3d-printed designs and mechanical solutions.

    So what I'd ideally like is to have a couple Skype/Zoom/whatever lessons/sessions with someone to help me come up with something that works in this context.

  2. #2
    Student Rodrigo's Avatar
    Join Date
    Apr 2020
    Location
    Portugal
    Posts
    2
    Follow Rodrigo On Twitter Add Rodrigo on Thingiverse
    Giving this one bump before letting this fade into the ether.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •