Close



Results 1 to 2 of 2
  1. #1

    Flashforge creator pro

    Hello,
    I have just upgraded from the Tiertime Up Mini 2, to the Flashforge creator pro.
    I am used to changing print beds to accommodate ABS and PLA.
    I have had trouble printing to the bed in the FF Creator Pro.
    When I print ABS, I had the filament stick pretty significantly to the bed, and had to scrape some off with some alcohol.
    When I print PLA, I had it not stick, massive curling.
    I have Simplify3d and have tried a couple things, mostly Blue Tape with PLA and not heating the bed. I am having a bit of trouble not getting the bed hot though. Any help, thoughts would be great. Thanks in advance.

  2. #2
    Student
    Join Date
    Apr 2020
    Location
    Middle of the UK
    Posts
    16
    Trouble getting the bed hot? I heat mine to 60ºC for PLA.

    Have you tried Pritt Stick/Elmers glue? Worked for me on my CTC printer with a glass bed.

    Glue + 60ºC No warping for me with PLA.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •