Close



Results 1 to 2 of 2
  1. #1

    Ender 3 Pro hotend not heating

    Hey guys,

    I've been using my Ender 3 for a few months now without issue, until tonight. About an hour into a print I heard the extruder clicking as it was slipping on the filament and shut it down. I thought the nozzle was just clogged because everything else looked normal, but then I noticed that the hotend was cool to the touch even though it read 200C on the display. I've looked at all of the connections and everything appears normal, but I don't have a multimeter on hand to actually test it. From everything that I've read so far it seems like it could be the thermistor, but I'm confused because everything I've found about the thermistor going out makes it sound like the temperature would be displaying 0. Is there anything else I should be checking? Any help would be greatly appreciated.

  2. #2

    https://get-thesis.com/blog/how-to-write-a-thesis-for-a-research-paper

    If you want to know how to compose a thesis for a research paper correctly, you may follow a link from the title.
    Here you can find a detailed explanation of it.
    Hope, this article will help you to improve your writing skills.
    https://get-thesis.com/blog/how-to-w...research-paper
    Last edited by walshemily0812; 03-02-2020 at 08:59 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •