Close



Results 1 to 4 of 4
  1. #1

    Printer recommendation...

    I have been going back and forth over what I want. I currently have an Ender 3 with a lot of mods and it pretty much sucks to deal with day in and day out. Here is what I want: 1. Something that is less of a pain than the Ender 3.2. Auto bed leveling3. Works well with S3d4. Possibly enclosed.5. Large print area to large prints6. $600 range. I am flexible.My budget before was quite a bit more but life changes. I hope some of you have some recommendations.Thank you!!!

  2. #2

  3. #3
    I have an opportunity at an older Ultimaker 2 for $450. I am not sure the Ultimaker 2 is worth $450 as it is probably 5+ years old but I have seen videos of it run and it seems to work well. Thoughts?

  4. #4
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    7,256
    Hmm, make sure you can get 2.85mm filament easily.
    $450 seems high for a 5 year old machine.
    Get it down to $300 and it might be worth a punt :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •