Close



Results 1 to 2 of 2

Thread: Extruder flow.

  1. #1

    Extruder flow.

    Hi, I've changed extruder on the ender 3 pro and mounted a Redrex, all ok besides the Wisamic 4mm glass plate. Re-calibrating.

    In simplify 3d set nozzle diameter 0.4 multiplier to 1 and extruder size equal to the nozzle.

    Result, walls from 0.23 to 0.25. Average 0.23. I do (0.4/0.23)x 1 and I get 1.73.

    I change the multiplier and enter 1.73. Reprint.The walls are still 0.23 to 0.24.

    Panic...

    Thank you
    chip

  2. #2
    Engineer-in-Training
    Join Date
    Aug 2015
    Posts
    256
    That's off by a lot, perhaps you're nozzle is clogged or not actually .4mm. Try a different nozzle if you have one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •