Close



Results 1 to 3 of 3
  1. #1

    Wanted: Heated Bed with stand-alone controller. DIY?

    First post here

    I have a Tinkerine Ditto Pro that doesn?t have a heated bed. Would like to add one but don?t believe there is any way to tie into the hardware of the printer.
    I see there are 12 and 24v heated beds available from many sources but having a hard time figuring out a combination of power supply and hopefully a digital voltage/temperature controller to power it krogerfeedback. Push buttons or dial...digital readout ideally

    A parts list would be awesome if someone could help.... or just buy a printer that comes with a heated bed?

    Thanks in advance!
    Last edited by leseenik; 01-20-2020 at 03:24 AM. Reason: Spelling

  2. #2
    i'd go with keenovo. expensive but wont burn your house down.

    here is a controller (42usd) https://keenovo.store/collections/ac...ge-of-30c-300c. the controller @110v has a capacity of 1600 watts, more than enoughph for a 3d printer (like 400 watts?)


    idk what size bed you have, but this controller needs a mains powered bed (i.e. 110vac or 220vac). fast heat times are a benifit of mains, also you wont need an extra 24v or 12v power supply.

    here are where to buy a bed from: https://www.keenovo.com/info/shop.html

  3. #3
    Well hello 3dprintboard members, and this would be my First post here and I think my answer matches your query the most,

    I have a Tinkerine Ditto Pro that doesn?t have a heated bed. Would like to add one but don?t believe there is any way to tie into the hardware of the printer.
    I see there are 12 and 24v heated beds available from many sources but having a hard time figuring out a combination of power supply and hopefully a digital voltage/temperature controller to power it krogerfeedback. Push buttons or dial...digital readout ideally

    A parts list would be awesome if someone could help.... or just buy a printer that comes with a heated bed?

    Thanks in advance!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •