Close



Results 1 to 5 of 5
  1. #1
    Student
    Join Date
    Feb 2014
    Location
    Tyler, TX
    Posts
    13

    Can't find setting in Merlin code

    I have made several adjustments in the configuration.h file to suit my custom 3D printer, but there is a setting that needs to change that I can't find. After homing all axis the extruder then moves out in the X direction about 40 mm. I need to change that to about 15 mm but I can't find that setting in the configuration.h file. Can someone please tell me where that setting is?

  2. #2
    Do you mean when the print starts? When the extruder moves off the platform to purge? Is so that is in the slicer script code

  3. #3
    Student
    Join Date
    Feb 2014
    Location
    Tyler, TX
    Posts
    13
    Where is the slicer script code? I am using MatterControl and MatterSlice.

  4. #4
    No idea.. just know it is in the script tab of S3D.
    From Simplified 3D for my printer
    G28 ; home all axes
    G1 Y50 Z0.3 F9600 ; move forward to avoid binder clips
    G1 X205 Z10 ; move off platform
    G1 Z0.4 ; position nozzle
    G92 E0 ; zero extruder
    G1 E25 F225 ; purge nozzle
    G92 E0 ; zero extruder
    G1 X190 Z0.1 E1.0 F1200 ; slow wipe
    G1 X180 Z0.25 ; lift

    I would assume if the software has a profile for your printer it is in that profile.. just guessing

  5. #5
    Student
    Join Date
    Feb 2014
    Location
    Tyler, TX
    Posts
    13
    Thanks, I'll see if I can find it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •