Close



Results 1 to 6 of 6
  1. #1
    Student krakenatwork's Avatar
    Join Date
    Nov 2019
    Location
    Quebec city
    Posts
    5

    Question Looking for a good large 3d printer.

    I've been burned having first bought a Kickstarter 3d printer that never showed up, then by a Wombot Modus (16"*16"*16" build volume) that's been mishandled bt the shipper (a forklift blade through the box bent it out of square - didn't see that until I signed the shipper's bill) and which was a hell to get 1st layer to adhere (and the general woes of a semi-working printer).

    Now I'm wondering if I should either shell 500+CAD$ to make the wombot working without knowing if the result will be satisfying (something like making a new bed that can be leveled, Buildtak or other similar stuff, probably guide rails and general hardware to make the printer stiffer, moving from belts to leadscrews for the Z axis), or shell 1300CAD$ on a CR 10 MAX (which only lacks guide rails and probably don't need them). My Wombot is currently gathering dust in the basement. "Disappointment" is an euphemism in this case.

    My sister bought a flashforge Creator Pro and she's very satisfied by this (small) machine. The print quality is there and it seems to be a very easy to use machine. It's her first 3d printer. Alas my ideas are in need of a bigger printer.

    I've listened to Teaching Tech's 2-part review of the CR-10 MAX (https://www.youtube.com/watch?v=ZQOidpEoAsE and https://www.youtube.com/watch?v=UGYc-L6dmLE) and he might have hit a lemon, but he had a hell of a time to make his printer to print good quality prints (layer to layer adhesion issues, he had to tune the board's voltages somehow). His review prompted Creality to enable Merlin's anti-runaway features in the firmware, so now it's a better printer yet.

    I also listened to SexyCyborg's review (https://www.youtube.com/watch?v=skFo37IEkB0) which was somewhere in these lines ("needs a few tweaks"), but she had an early production model and it seems some have received a few upgrades since.

    On the other hand, The First Layer's review (https://www.youtube.com/watch?v=reLJZBLpdZM&t=1s) seems to imply that it can work pretty well out of the box.

    Nexi Tech's review of the CR-10 Max is also a positive review (https://www.youtube.com/watch?v=lE9i1-DX1aI&t=293s).

    I've also read a few reviews: All3dp's review is not very good, tobuya3dprinter's review is neutral.

    So this far it's a pretty mixed bag of reviews.

    Would the CR-10 MAX be a "printer that just works" like the Flashforge, good for a "semi-newbie"?

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    7,057
    oops - forgot to approve the thread - sorry :-)

  3. #3
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    7,057
    the anet a8 PLUS is probably the best value i3 around:
    https://www.amazon.com/Anet-All-Meta...4944669&sr=8-3

    has dual z motors, direct drive extruder and side support rails for the bed.
    Yes it's cheap, and you will probably need to do some modifications - but it's the best starting framework in it's price range.

  4. #4
    Student krakenatwork's Avatar
    Join Date
    Nov 2019
    Location
    Quebec city
    Posts
    5
    Quote Originally Posted by curious aardvark View Post
    oops - forgot to approve the thread - sorry :-)
    No problem, Sorry for the double-post (the pop-up message on the 1st post disappeared before I could read it (maybe I clicked somewhere without noticing). I thought my user had to be approved, not the thread, so I tried again the next day.

  5. #5
    Student krakenatwork's Avatar
    Join Date
    Nov 2019
    Location
    Quebec city
    Posts
    5
    Quote Originally Posted by curious aardvark View Post
    the anet a8 PLUS is probably the best value i3 around:
    https://www.amazon.com/Anet-All-Meta...4944669&sr=8-3

    has dual z motors, direct drive extruder and side support rails for the bed.
    Yes it's cheap, and you will probably need to do some modifications - but it's the best starting framework in it's price range.
    What kind of mods are a must on this printer? Thanks for the info, I'll now have some homework to do :-)

  6. #6
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    7,057
    no clue on the mods.
    Might not need any :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •