Close



Results 1 to 3 of 3
  1. #1

    WomBot Exilis Xl

    I was given a WomBot Exilis Xl because the owner was having issues with it. I think that I have found one of the big issues, the BlTouch is poorly set up and not letting the system home properly. But on top of that, it is using the stock firmware. I was wondering if anyone had experience with these and could advise me on the best update I could do to the firmware. I have found very little info on these printers.

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    7,012
    looks like a standard i3 - so the creality cr10 pro firmware would probably work.

    In my experience with 5 totally different printers - stock firmware usually works more reliably than slapping the latest marlin on it.
    I have yet to either want or need to change any of my machine's firmware.

    sound's like you just need to sort the bltouch out - is it a clone ?
    The cheap clones do tend to have issues and most manufacturers don't use genuine bl-touch parts.

  3. #3
    Quote Originally Posted by curious aardvark View Post
    sound's like you just need to sort the bltouch out - is it a clone ?
    The cheap clones do tend to have issues and most manufacturers don't use genuine bl-touch parts.
    As far as I can tell it is a genuine BlTouch, but as I said, there is not a ton of information on this thing...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •