Results 1 to 2 of 2

Thread: Pinch Roller

  1. #1
    Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Washington State, USA
    Add Roberts_Clif on Thingiverse

    Pinch Roller

    I am looking for a bearing pinch roller.

    ~ 19mm OD height {close will work}
    ~ 11mm width {close will work}
    4.8mm hole ID {needs to fit snug on its keeper pin}

    They want $62 each for this almost obsolete part and I need two.
    I have replaced the hardened brittle rubber on both bearings with three #6 Rubber Diverter washer *1
    They got my cutter/printer working though the washers only measure 18mm OD.
    Would settle for a Tyre similar to the #6 Rubber Diverter washer wish I could find one that is 11mm thick.

    Thank You.

    Note 1 : #6 Rubber Diverter washers Stock Number 35684 B 3/4 in. OD x 3/8 in ID 9/64 width.

  2. #2
    Join Date
    Jun 2019
    Pinch Roller is used to make tires. I can know about its dimensions and properties. It is mainly sued for industrial purposes amsterdam to bruges private tours. I came to know about the process of making tiers similar to the rubber roller. Try to share more such topics.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts