Close



Results 1 to 5 of 5

Threaded View

  1. #1

    Replaced extruder/hotend - Reduced quality, shifting in layers?

    3dpUnlimited 1000
    V6 hotend
    0.6mm nozzle
    Matterhackers Pro PLA 3mm
    215C extrude temp
    70C Bed temp

    I was having issues with a clogging V6 hotend. I swapped over to my second extruder (same type) which has had almost zero use.

    I physically swapped the extruder assembly to the front.
    There is a big difference in print quality now. It looks as though there is slop in the lead screws but I find it hard to believe because the prints literally a day before were much better (and all the ones before that).

    Below are a couple of images before extruder change and after.
    The nozzle is the same. 0.6mm though.

    Before:
    After
    Last edited by not-a-number; 07-11-2019 at 09:53 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •