Close
Flash Forge Adventurer 3



Results 1 to 1 of 1
  1. #1

    Marlin setting for this heatbed?

    Hey guys, I have recently purchased this 120*120 heatbed MK2B for my 3d printer project/upgrade, but I am having trouble identifying the correct thermistor type for my Marlin configuration.h file. Does anyone know what kind of thermistor number should I put for the Marlin?

    * Temperature sensors available:
    *
    * -4 : thermocouple with AD8495
    * -3 : thermocouple with MAX31855 (only for sensor 0)
    * -2 : thermocouple with MAX6675 (only for sensor 0)
    * -1 : thermocouple with AD595
    * 0 : not used
    * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
    * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
    * 3 : Mendel-parts thermistor (4.7k pullup)
    * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
    * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
    * 501 : 100K Zonestar (Tronxy X3A) Thermistor
    * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
    * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
    * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
    * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
    * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
    * 10 : 100k RS thermistor 198-961 (4.7k pullup)
    * 11 : 100k beta 3950 1% thermistor (4.7k pullup)
    * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
    * 13 : 100k Hisens 3950 1% up to 300?C for hotend "Simple ONE " & "Hotend "All In ONE"
    * 15 : 100k thermistor calibration for JGAurora A5 hotend
    * 20 : the PT100 circuit found in the Ultimainboard V2.x
    * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
    * 66 : 4.7M High Temperature thermistor from Dyze Design
    * 70 : the 100K thermistor found in the bq Hephestos 2
    * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
    *
    * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
    * (but gives greater accuracy and more stable PID)
    * 51 : 100k thermistor - EPCOS (1k pullup)
    * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
    * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
    *
    * 1047 : Pt1000 with 4k7 pullup
    * 1010 : Pt1000 with 1k pullup (non standard)
    * 147 : Pt100 with 4k7 pullup
    * 110 : Pt100 with 1k pullup (non standard)


    these are the options I have

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •