Close
Flash Forge Adventurer 3



Results 1 to 4 of 4
  1. #1

    Phrozen Shuffle does not print!

    I have Phrozen Shuffle 3D printer and I am new to 3D printing. After I submit sliced slc image to the printer it starts to print, the platform moves up and down but after it finished there is no print out. The z axis was calibrated according to instruction. What am i doing wrong? Any suggestions? Thanks.

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    6,477
    sounds like the lcd panel isn't working or the led isn't powered up.
    Apparently the panel and led light are seperate.
    Try a test print without resin and see if the panel is lighting up.

  3. #3
    Quote Originally Posted by curious aardvark View Post
    sounds like the lcd panel isn't working or the led isn't powered up.
    Apparently the panel and led light are seperate.
    Try a test print without resin and see if the panel is lighting up.
    tried to print with out resin the panel lights up with blue light

  4. #4
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    6,477
    but is the image changing ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •