Results 1 to 2 of 2
  1. #1

    Question Simplify3D - Bed probing and print area placeholders - Gcode script

    Hi all,
    my printer has a really big bed and often I just need to print small object on different bed areas. So an high-definition probing (with a BLTouch) on the whole bed area can result in a useless and really time consuming activity.

    So I'm looking for a way to probe, before each print, only the bed area affected by the print itself.
    To obtain this result I need to set the probing grid in the GCode "starting script" using a dynamically composed M557 command, but at this stage I also need some sort of Simplify3D variables in order to "know" the maximum and the minimum X and Y value used in the print process.

    Ideally I would obtain something like:
    M557 X[min_x]:[max_x] Y[min_y]:[max_y]
    Does Simplify3D provide this kind of placeholders or is obtaining this goal a wild-goose chase?

    Thank you!

    P.S. =I'm using Simplify3D v. 4.1.1 + RepRap + Duet

  2. #2
    Hi buddy, do try inputting with loop variables over the strings. That should work well!Regards,Seder Smith Plex Tutuapp Vidmate
    Last edited by sedersmith; 12-13-2019 at 01:36 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts