Flash Forge Adventurer 3

Results 1 to 5 of 5
  1. #1

    How much would it cost to print a figure?

    Hey, I am new here!
    I have a couple of questions.
    How much would it cost to get a 3d printer which could print this figure in a good quality?
    And how much approximately would it cost to print the figure 10 cm long or 20 cm long if I bought a printer?

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    depending on the printer the material to print could be anything from a 50 cents on up to a few dollars.
    for the 20cm print start thibnking around $4-500 and a resin based machine.

    For the 10 cm, you'd still be better off with resin - from aquality point of view, so similiar price :-)

    If you want to stick with fdm - then a dual nozzle system for soluble supports would be a good idea.

  3. #3
    Join Date
    Aug 2015
    For a resin print, a 10cm print could cost between a $1 to $10, depending on how well you hollowed it out well before printing, how thin the walls were, and how much support you used.

    A hollow 20cm print with the same wall thickness would cost about 4 times as much as the 10cm print.

  4. #4
    3D printing will not cost you more. It depends on what you are printing and which material you are using to print.

  5. #5
    The cost will depend on which type of 3D printer you want, what is your requirements and what type of material you want to use.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts