PLEASE! I need help with my Ender 3.

[Roberts_Clif]

When I stated Printing PLA two years ago I was printing at 196C using this filament.


I print it at 200-204C this was after having to change the larger Hot-end heater block with a smaller Heater Block.
I cold not find the larger heater blocks, and purchased 10 of the smaller, so will have these for a while.

PLA.jpg

I also Have some ABS that I started printing ABS in 2018 an is has a lower than normal printing temperature.
This is printed at 228C with really good results as shown in the image below...

ABS.jpg

Same Filament did not have an image of model using the ABS Silver.
It amazed me as the ABS actually bridged better than the PLA

FOB ABS.jpg