Results 1 to 3 of 3
Thread: Extruder #2 dragging
-
10-25-2018, 05:00 PM #1
- Join Date
- Sep 2018
- Posts
- 16
Extruder #2 dragging
Hi, I inherited a Solidoodle with two print heads and I have discovered the nozzle for extruder #2 is lower and drags across a print that is coming out of extruder #1. I haven't found any instruction online about how to move the nozzle up and down. Can anyone here offer advice or links? Thanks!
-
10-29-2018, 08:39 AM #2
check there isn't a tiny bit of filament sticking out of the nozzle.
If I've been printing with the other nozzle before switching. I'll make sure no filament protudes by a quick rub with a sanding block. Surprising just how little there needs to be to cause issues.
Other than that - can't really help.
-
10-30-2018, 08:05 AM #3
- Join Date
- Sep 2018
- Posts
- 16
Thanks for your response. It?s the extruder itself, not a piece of filament.
What is the best material type for...
12-06-2024, 01:16 PM in General 3D Printing Discussion