Results 1 to 1 of 1
Thread: Heated bed issue
-
10-20-2018, 06:26 PM #1
- Join Date
- Oct 2018
- Posts
- 1
Heated bed issue
Hello guys,
I have an AM8 with ramps 1.4 and my heated bed is Anycubic ultrabase. I use mosfet too.
So, when i printing with PETG at 75 ? C the temperature during printing does not move, if i printing with PLA the temperature starts at 60 ? C and up to 90 ? / 100 ?. Remembering that I did PID for both 75? and 60?. It seems that the 60? are "bugged".
Thank you
Print not sticking to base plate?
Yesterday, 01:26 PM in General 3D Printing Discussion