Close



Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11

    look ok

    Let me have a file try out print this How much you want friend You are amazing help me out

  2. #12
    Technologist
    Join Date
    Jun 2014
    Posts
    183
    I've attached the STL file generated from the cross-section image posted earlier. It's very very small, but you know that! If you print with 0.100 mm layers, it should be okay. At 0.200 layers, the curves and slopes will be bumpy.

    Please let me know if it works for you.
    Attached Files Attached Files

  3. #13
    Here's a refreshed illustration, utilizing 5.0 as the aggregate width, which can be effortlessly balanced if necessary, this attracting is proportional, which demonstrates to you how the extents will show up in cross segment...Not how long, but how well you have lived is the main thing

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •