Cura Profile ABS 0.3mm Prusa MK3

[anti-Wrap]

Hi,
We have attached a very good Cura profile for 3D printing in ABS using the Prusa MK3.
The layer height is set a 0.3 mm. The profile is a good general starting point for any ABS part (whose resolution can be at 0.3 mm).
A bit of tuning will be necessary depending on the part itself, but the main things are there.

We hope it will help new ABS printers getting started.

-The DustnPrint Team,

[Roberts_Clif]

I will download your setting to see where my fall in line.