Flash Forge Adventurer 3

Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1

    Two Filament Questions Regarding Brands

    Do most brands perform similarly? IOW if I have my slicer settings for e.g. Hatchbox will they work well for e.g. Matter Hackers?

    Which brands of PLA are good "go to" brands? I'll keep this post updated with recommended brands.

    For example, I know that Hatchbox is good, but it's hard to find in some colors.

    I hear Matter Hackers is another good brand; some of their stuff is pricey, but has no additional value that I can determine. Someone please confirm consistency of print jobs with Matter Hackers for me?


  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    never used ether of those brands.
    But different brands will perform differently.

    In general you won't need to change settings much.

    I've just switched from red flashforge (my current favourite filament) to yousu black to print some car parts. I know they both work with the same settings. But for other brands or colours I might have changed a few things.

    Flashforge pla is amazing stuff - thoroughly recommended. The yousu stuff is also pretty good.

    I haven't had any 'bad' filament for a couple of years now.
    The industry seesm to have standardised on the manufacturing equipment, so you don't tend to get diameter variations (I hold my hand up, I have never bothered to adjust for diameter variance, never). Some brands of pla might still produce a little warp, but on the whole even the really cheap no brand stuff from ebay, is pretty good.

  3. #3
    Why is the Flashforge PLA $7 more than most other brands?

    And why are most places out of some, if not all, colors of PLA? Has 3d printing really gotten that popular?

  4. #4
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    most 3d printing is done with either black or white pla.
    Red and blue are the second most popular pair. So as a seller, you would keep those four colours in stock, and not so much the other colours.

    The flash forge is worth it. Prints fantastic, clean, fast. It's got great strength and toughness and looks great :-)
    The red I use is semi-translucent. Which i like.

    Given that you can now buy a 3d printer for less than £100, and a good one for under £200 - then yes I reckon 3d printing has got fairly popular :-)

  5. #5
    Engineer ralphzoontjens's Avatar
    Join Date
    Nov 2013
    Tilburg, the Netherlands
    Follow ralphzoontjens On Twitter Add ralphzoontjens on Facebook Add ralphzoontjens on Shapeways Add ralphzoontjens on Thingiverse
    Yes 3D printing is incredibly popular because of its low barriers to entry.
    However we are printing way too much useless stuff, so we need to stop printing crap and dedicate to serious projects

    The slight differences are mostly in flow rate and temperature, they will all display some different behavior when extruded.
    My best experiences with filament are EUMakers and Colorfabb. I hear Hatchbox is the best budget choice.

  6. #6
    I don't disagree with you Ralph, but printing useless stuff is how you learn what works and what doesn't.

    There's no doubt in my mind that I'll be printing calibration cubes, benchys, and other stuff till I get the quality I want. Then repeat for different materials.

    After that I'll be doing some cube toys and other decorative items, as well as other functional items for myself.

  7. #7
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    I'm with ralph. I have never printed calibration cubes, benchiues or other pointless 'calibration' prints.

    I've just made the stuff I wanted to make, and adjusted accordingly.

    For new filament I might make giveaways as a test. The makerbolt and nut set is one of my favourite giveaways as it highlights both the versatility and practical uses of 3d printing. While using about 5 grams.
    Shopping trolley keys and tokens are another of my test prints. All things I can use, give away or sell.

    You won't learn ANYTHING from a benchy that you can't learn from any other print.
    You might as well buy ten rolls of filament and straight away throw one in the bin.

    I see far too many people, round here and on facebook who spend weeks, messing about with calibration prints, firmware and the like - when all that time they could have been making the stuff they actually wanted to make and learning as they went.

  8. #8
    Join Date
    May 2018
    Noting like a single walled 2mm tall square and an accurate digital caliper to set starting height and extruder multiplier so your first 10 hour print doesn't fail 3 times! One persons useless junk is anothers treasure..

  9. #9
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    that makes sense.
    But benchies - nah :-)

  10. #10
    Well, more than a benchy I was thinking about this. Though I'd take a link to that small cube you were talking about.


Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts