Results 1 to 1 of 1
Thread: QIDI Tech 1 dual extrusion woes
-
03-31-2018, 10:13 PM #1
- Join Date
- Jan 2017
- Posts
- 5
QIDI Tech 1 dual extrusion woes
Hello, I've been having trouble with dual extrusion lately. For some reason my ooze shields have been coming out TERRIBLY, and the prints have been terrible as a result.
HEre's a dual extrusion Benchy for context. Here it is with the Ooze shield on:
And here is what it looks like sans ooze shield:
As you can see, the ooze shield is in terrible condition, barely holding up in the print at all. I know it's supposed to be weak but it's not supposed to be like THAT. At least as far as I can tell.
Here are my stats:
QIDI Tech 1 3D printer (copy of Flash Forge Creator Pro).
Upgraded both extruders with metal extruders, not the stock extruders.
Here are my settings:
I am wondering if my ooze control settings are somehow affecting the ooze shield. I am using Hatchbox PLA for both extruders. The retraction is so small because of the metal extruders.
Any assistance is greatly appreciated!
Thanks.
-Giando
IMGUR album with all images:
https://imgur.com/a/7FSgg
Extruder not feeding during print,...
Yesterday, 01:59 AM in Tips, Tricks and Tech Help