Results 1 to 1 of 1
Thread: Pegasus 12, extruding thin walls
Hybrid View
-
02-14-2018, 01:41 PM #1
- Join Date
- Jul 2016
- Posts
- 7
Pegasus 12, extruding thin walls
I'm at loss after trying to fix this for months.
Only mod is the acme rods for Z axis. It uses E3D v6 extruder with stock Ramp 1.4 board. No matter what settings I change (Zsteps, extruder multiplier setting) it seem to print thin wall. It seems like it's not extruding enough. Any ideas or suggestions?
thinwall.jpg
Print not sticking to base plate?
Yesterday, 01:26 PM in General 3D Printing Discussion