Close
Flash Forge Inventor II Spring Promotion



Results 1 to 3 of 3
  1. #1
    Engineer-in-Training
    Join Date
    Jul 2016
    Location
    South Florida, USA
    Posts
    260
    Add AutoWiz on Facebook

    My Ambitiously Large Project

    I have 4 3d printers in my home. So I have been looking for a large project to work all my printers and tune them along the way. My wife has these 2 bearded dragons. So I thought it would be cool to build a terrarium for the 2 lizzards. I don't work with wood too much so I don't have a table saw and stuff so I did some planning and had home depot cut the wood sheets and 2x4's to the lengths I needed and when I got home it was just pre drilling holes and assembly. Here are some choice pictures of the building of the base structure..







    Still have to add shelves and many layers of stain but the base structure is built..


  2. #2
    Engineer-in-Training
    Join Date
    Jul 2016
    Location
    South Florida, USA
    Posts
    260
    Add AutoWiz on Facebook
    Fast forward past all the staining and drying and building and installing the 3 shelves to create 2 levels for each dragon and here we are elbow deep in printing parts to make this structure a terrarium..





    What we learned from putting a lizard on one of these shelves is that they don't get any traction. So we must put sand on each level. This requires a border around each level to hold the sand..





    I am going to design and print a really cool stairwell for the bearded dragons to walk up and down..


  3. #3
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    5,883
    looks like fun :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •