Flash Forge Inventor Series

Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2017

    all metal hot ends - nylon

    So, thinking about doing some nylon and see that the higher required extruder temps are harmful to the PTFE lined extruders like in my Qidi X One and Klic N Print 3D. So I was thinking of upgrading one extruder... maybe one of the 2 in the KnP, to an all metal hot end. I see several offered, like the E3D v6 that look promising but I have no idea if it would fit in my printers. Are these things sort of universal? How does one go about determining what fits and what doesn't?

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    you could simply change the ptfe tube for a metal tube. Job done :-)

    Most nylon will print at 250ish anyway

    Nylon is a real bastard to print with - so good luck :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts