Hey guys, I'm having issues with my flashforge creator pro where it acts as if there's a jam and thus won't feed filament. It makes the typical clicking/thumping sound that we have all seen where there's a jam. The problem is this, there is no jam. If I reboot my machine immediately and do a filament load, the filament extrudes just fine. No clicking or anything. It seems to happen most on my right extruder but it's begin to happen with the left now more often.

Anyway, the fact that rebooting the machine gets rid of the problem (and the fact that I've religiously cleaned and cleared the nozzles and teflon tubes) tells me that we've got a software/hardware issue happening. Would anyone have any suggestions?

Some additional info:
Printer odometer: 5304 meters
Print entirely with ABS
Recently replaced nozzles and teflon
Recently cleaned feeder gear (although it's rarely very dirty)
Thanks for any help you might be able to offer.