Close



Page 9 of 11 FirstFirst ... 7891011 LastLast
Results 81 to 90 of 109
  1. #81
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Quote Originally Posted by curious aardvark View Post
    hi-temp double sided sticky tape.
    It's what i'm currently using for my printbite on the flashforge creator.

    Seriously though 30 euros is worth the price.
    Isn't printbite self adhesive already?

  2. #82
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Quote Originally Posted by number40Fan View Post
    How much of a gap between the bed and frame? I could make you up some glass holders. How thick is the bed, too. 6mm?
    Haven't yet measured them but i think maybe 2 mm and the bed should be either 5 or 6 mm

  3. #83
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    the original printbite I got a couple years ago - was not self adhesive.
    It also did not have the very fine pattern the current stuff has.

    I'd have to say that the sheet of recent printbite on alexa is noticeably better than the original sheet on the flashforge.

  4. #84
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Quote Originally Posted by curious aardvark View Post
    the original printbite I got a couple years ago - was not self adhesive.
    It also did not have the very fine pattern the current stuff has.

    I'd have to say that the sheet of recent printbite on alexa is noticeably better than the original sheet on the flashforge.
    Alright, i'll see how much a custom glass will cost me from some shop

  5. #85
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Quote Originally Posted by number40Fan View Post
    If you need me to make you some corner clips, let me know.
    Yeah don't worry, thanks!

  6. #86
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Hello guys, long time no see, i've been pretty busy lately.
    I've only recently gone back having fun with the printer, i finally decided to buy a glass to replace the stock pad which is absolute trash. i bought this simple 3mm 150x150mm glass, but when it arrived home, i found out it's not exactly 150x150mm because apparently these guys don't cut with CNC, so it's basically 148.85x148.68mm and the plate is 150.03x149.86mm, so yeah guess what happens...

    here's few pics:

    http://imgur.com/a/kUsce

    i contacted the shop where i bought this, and they asked me to send photos and everything, but it's unlikely they'll replace or refund me anything, it's ebay after all, so i'll probably have to find another way to keep the glass in position. i might try a 145x145x0.5mm thermal pad or some thermal tape or maybe, even better, a big ass 150x150 adhesive thermal adesive pad. What do you guys think?

  7. #87
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    Double sided vinyl sticky tape will do it. Doesn't need to be special thermal transfer. Its that thin that it doen't effect the heat teansfer.

  8. #88
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Quote Originally Posted by curious aardvark View Post
    Double sided vinyl sticky tape will do it. Doesn't need to be special thermal transfer. Its that thin that it doen't effect the heat teansfer.
    Quote Originally Posted by number40Fan View Post
    Hair spray on the back of the glass will hold it just as well.

    Thank you both, aardvark could you please link (even pm) exactly what you have in mind? I actually don't know how's that particularly called in my language.

    number40fan LOL! didn't expect such thing to be suggested also, how does it behave with heat?

  9. #89
    oxidized, this is Chen from flashforge. now we rank top 3 in the world for FDM. please contact me with skype shakiradido

  10. #90
    Technician
    Join Date
    Jul 2017
    Posts
    59
    Quote Originally Posted by number40Fan View Post
    The same it does when sprayed on the top of the glass. Sticks when warmed up and releases when cold.
    Alright, meanwhile i bought a slim thermal pad, which i'll try otherwise i'll try everything you guys suggested, probably giving the tape priority.

Page 9 of 11 FirstFirst ... 7891011 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •