Leeloo has her nose out-of-joint. After replacing the kapton, she made several things quite handily, then....

Filament wouldn't feed from either extruder.

Cleaned the "gears" on the steppers. Reassembled. Checked that the filament wasn't tangled behind. Wow, the right one pulls hard through the guide tube. Pulled it out and rethreaded it. "That's better."

Now, it makes blobs of filament on the nozzles but nothing on the hbp? What the? Why is there 3mm between the nozzle and hbp? Did the level the build plate operation. I guess now I know how to adjust the squidge.

Now, no filament feed again? Do all that above.

Now, it extrudes filament onto the build plate, but nothing sticks. Clean the build plate again.

Now it extrudes filament onto the build plate, but nothing sticks.

Harumph! Be that way!


Goal is 12 sets of white parts and 12 sets of black parts by July 10. Have 9 sets of white parts.