Close



Results 1 to 3 of 3
  1. #1
    Administrator Eddie's Avatar
    Join Date
    Sep 2013
    Location
    Cape Coral, FL
    Posts
    1,844
    Follow Eddie On Twitter Add Eddie on Facebook Add Eddie on Google+ Add Eddie on Shapeways Add Eddie on Thingiverse

    Indiegogo Fabtotum Update 4/26/14

    DEVELOPMENT UPDATE #8

    Dear Backers
    Here we are with another development update.
    We teased you a lot but it's time now to show you for the first time ever the Pre-Production prototype and expose what's changed from the Alpha and Beta.
    With the end of the indiegogo campaign we understood that, along with performances, user experience and reliability was something we could improve a lot. We think we did.
    But let's the images do the talking; the FABtotum personal Fabricator.




    (note: quality will improve even during the production phase)

    Supply Chain
    As you know we have hundreds of parts that need to be stocked.
    That's one thing. We also have third party contractors that are working on finalizing the components (like the molds or the laser cut parts).
    We also have the packaging being tested so that the machines can be shipped without damages all over the world.





    Pre Production Specifications

    As promised we have closed in the specs, so you can have a grasp of the complexity and magnitude of this project:



    Important: Updated schedule

    Our first timeline, published in September 2013 has been a guidance in the development of the Personal Fabricator, but we also raised the challenge and improved the quality while increasing production efficiency.

    Our originals plans where to start shipping by the end of May, At this point however we would like to inform our backers about the new schedule.
    As we pointed out in the last few updates, this delay was expected and working during the holidays for the past 8 months has not been enought to make up for it. Our bad.
    Admittedly, it's not completely a supply chain fault, we also invested more time in development and we want to test the improved assembly process and quality control before starting the shipping procedure.

    It's not all bad news.
    In fact we'll be able still to ship a number of units for the first batch and thanks to the re-engineering done between the alpha prototype and the final version.
    We expect to be able to assemble the remaining units much faster than expected, and *maybe* be able to ship all units before the original schedule.

    Overall, as (we think) we demonstrated during the development stage, we strive for perfection, but most of all we love to be honest about our design process and what are the reasons behind each decision.

    Keep you feedback coming.
    The FABteam





  2. #2
    Super Moderator DrLuigi's Avatar
    Join Date
    Oct 2013
    Location
    Belgium
    Posts
    502
    Gotta say for 999 dollars, this was one of the greatest printers i have seen in a while

    Still looks awsome, and should print the same.

  3. #3
    Engineer-in-Training
    Join Date
    Jun 2014
    Posts
    349
    I'm just now looking into desktop cnc routers. Seems hard to believe this Fab box can do it in addition to the other things, but it would be nice if so.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •