Close



Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Student RP Iron Man's Avatar
    Join Date
    Oct 2013
    Location
    Kingston, ON, Canada
    Posts
    48
    Follow RP Iron Man On Twitter Add RP Iron Man on Facebook Add RP Iron Man on Google+ Add RP Iron Man on Thingiverse

    The Prometheus System - Intuitive Multi-Filament 3D Printing!

    I have some exciting news about a new product that we have been working on

    The Prometheus System!



    DisTech Automation has developed a new solution for multi-filament 3D printing called The Prometheus System which allows you to print 2 different filaments from a single nozzle. It works by pulling one filament out of the hot end and feeding another filament into the same hot end to switch between filaments. This new product builds off of our existing Prometheus V2 Hot End.

    Using a combination of custom filament switching G-code, precision machined parts, the 1-piece internally polished Prometheus V2 nozzle, and powerful geared extruder stepper motors, we are able to reliably print objects with hundreds of filament switches in a single print!



    This enables you to print multi-color objects, print with support material, or create multi-material prints!


    Multi-Color Worlds printed in ABS plastic.


    Propellers: Yellow PLA with PolySupport support material on the left; Nylon Alloy 910 with Guidel!ne PETG support material on the right.


    Composite wrench printed with Colorfabb XT-CF20 Carbon Fiber perimeters and Colorfabb XT Clear infill.


    Glow-in-the-dark objects printed with Colorfabb Glowfill

    The objective with this new product is to eliminate the difficulties and quality issues associated with conventional methods of dual extrusion (calibration, nozzle dripping, color contamination, extrusion pressure, etc...).

    The Prometheus System is a unique approach to multi-filament 3D printing that is designed to solve all of these issues! By using a single nozzle, The Prometheus System eliminates the calibration and nozzle dripping issues that affect dual nozzle configurations. In addition, by feeding one filament at a time into a single hot end, The Prometheus System prevents the problems with color contamination and increased extrusion pressure that are associated with recently popularized color mixing hot ends. This results in clean color transitions and flawless printed parts:







    I am really excited to hear what you all think of this new product! We have been working hard to find the optimal solution for multi-filament 3D printing and we think this is it! Please use this thread to share your thoughts on our new product and our unique approach. We are committed to working with the open source community and we will be releasing this product under the CC BY-NC-SA 3.0 Creative Commons license.

    Our Kickstarter campaign for The Prometheus System will launch on September 6th. You can sign up at http://distechinnovations.com/ to receive a Kickstarter launch notification and get the first pick of the discounted Early Bird rewards.

    Happy Printing!

    Eric

  2. #2
    Super Moderator Geoff's Avatar
    Join Date
    Nov 2013
    Location
    NSW, Australia
    Posts
    1,824
    Add Geoff on Thingiverse
    I think very nice dual extrusion! some of those prints are great. So it sucks one filament out and puts another in? that sounds simple enough it might just work
    Hex3D - 3D Printing and Design http://www.hex3d.com

  3. #3
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    lots of machines with similiar technology around.
    But yours still needs a purge pillar, most of the others don't seem to.

  4. #4
    Student RP Iron Man's Avatar
    Join Date
    Oct 2013
    Location
    Kingston, ON, Canada
    Posts
    48
    Follow RP Iron Man On Twitter Add RP Iron Man on Facebook Add RP Iron Man on Google+ Add RP Iron Man on Thingiverse
    @Geoff

    It sure looks simple but it is much more difficult than it looks People have been trying this method of multi-filament 3D printing for a long time but nobody has got it working reliably...except us! The details of how we got it working are outlined on the campaign page.

    @curious aardvark

    All technologies that use a single nozzle for multiple filaments require a purge tower. It is necessary to get clean transitions by purging the remaining previous plastic from the hot end. Even dual nozzle solutions require a bit of purging because the molten plastic slowly drips out of one nozzle (and creates messy lines all over your print!) while the other nozzle is printing. In order to reestablish hot end pressure, you need to purge a bit of filament.

    Our solution eliminates all of the other issues associated with conventional solutions and essentially lets you print multiple filaments with the precision and performance of a single hot end! The results speak for themselves

  5. #5

  6. #6
    Student RP Iron Man's Avatar
    Join Date
    Oct 2013
    Location
    Kingston, ON, Canada
    Posts
    48
    Follow RP Iron Man On Twitter Add RP Iron Man on Facebook Add RP Iron Man on Google+ Add RP Iron Man on Thingiverse
    We just launched our Kickstarter campaign for The Prometheus System!

    Click on the link below to visit the Kickstarter page:

    https://www.kickstarter.com/projects...3d/description

    We would really appreciate your support!

    Cheers,
    Eric

  7. #7
    Engineer
    Join Date
    Dec 2014
    Location
    Canada
    Posts
    498
    looks like it would really slow down the printing. switching, purging,

  8. #8
    Student RP Iron Man's Avatar
    Join Date
    Oct 2013
    Location
    Kingston, ON, Canada
    Posts
    48
    Follow RP Iron Man On Twitter Add RP Iron Man on Facebook Add RP Iron Man on Google+ Add RP Iron Man on Thingiverse
    @adamfilip It is true that the filament switching and purging does add some time to the print, but that is necessary for multi-filament printing. It is a tradeoff in order to achieve the higher quality prints!

  9. #9
    Student RP Iron Man's Avatar
    Join Date
    Oct 2013
    Location
    Kingston, ON, Canada
    Posts
    48
    Follow RP Iron Man On Twitter Add RP Iron Man on Facebook Add RP Iron Man on Google+ Add RP Iron Man on Thingiverse
    @cwaa

    First of all, there is no reason to believe that we won't deliver the product. Our company has a strong reputation and an established customer base that can attest to this.

    Secondly, the Early Bird shipping is being pushed back from November to December, NOT January. The remaining Kickstarter rewards that were projected to ship in December will now ship at the beginning of January. We have been very transparent in our update about the progress with production and the delay that caused us to push back the delivery dates.

    You can see the production update here:

    https://www.kickstarter.com/projects.../posts/1742601

    I don't think it is fair to call this a fraud. We are doing our best to manufacture a quality product asap but please keep in mind that delays can happen. Our manufacturer needs more time to ensure the quality of one of the critical components so we cannot rush them. Our priority is that we ship a final high-quality product to our Kickstarter backers.

    That's fine if you want a refund. I just got in touch with you through email to sort out the details.

    Regards,
    Eric

  10. #10
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    Quote Originally Posted by cwaa View Post
    I signed up for this promotion and now they won't deliver . Shipping has slipped from November to January. Watch out this is a fraud.
    Given that the average kickstarter is around 18months late - a 1-2 month delay is as good as bang on time.
    Certainly much much too early to claim it's failed or a fraud. please think before you type in future.

    @rp - so is this extruder simplify3d compatible ?

    And can you print two materials with different print temperatures ?
    Last edited by curious aardvark; 11-20-2016 at 12:02 PM.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •