Pegasus 12" Build Notes

[uncle_bob]

Hi

Ok, here's the rest of the pic's



225_ - 7.jpg


Above, tangle of wires going into the Ramps. It's mounted on a custom printed part. The fan mount is also custom.


225_ - 8.jpg

Above is a slightly different angle on the tangle of wires going into the Ramps.


That's about as good as I can do with the cell phone. To get better, I'm going to have to pull out the Nikon and do a real photo shoot. If these aren't good enough, let me know what you need to see and I'll try to get the all of the right gear set up.

Bob