Close



Results 1 to 4 of 4
  1. #1

    Guys, please help me with my Printrbot Simple Kit - 1405 Model

    Anything I try to print with Pronteface, I get this message:
    [ERROR] Can't read from printer (disconnected?) (SerialException): call ClearCommError failed
    [ERROR] Can't write to printer (disconnected?) (SerialException): WriteFile failed ([Error 22] The device does not recognize the command.)

    Please help.

  2. #2
    Are you sure you've selected the correct COM port?

  3. #3
    Yes I did, I was able to control the printer, set the temperature, move the printer. But when I try to print I get that message

  4. #4
    Super Moderator Geoff's Avatar
    Join Date
    Nov 2013
    Location
    NSW, Australia
    Posts
    1,825
    Add Geoff on Thingiverse
    Quote Originally Posted by tariye View Post
    Yes I did, I was able to control the printer, set the temperature, move the printer. But when I try to print I get that message
    It's a shame there is no display as it's hard to print direct from SD with no interface
    Hex3D - 3D Printing and Design http://www.hex3d.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •