Close



Results 1 to 4 of 4
  1. #1

    Ultra High Resolution Print

    I got the opportunity to do a test print and timelapse for one of 3DFacture's potential customers. It was by far the most difficult thing I have tried to print and the highest resolution part I've done. The STL file was over 800MBs, it took a fair amount of time just to setup the print because my computer slowed down so much haha. If you watch the video and notice in creation workshop that pretty much every time I do anything creation workshop stops responding and I have to wait for everything to catch up.

    I'm super excited with how everything turned out in the end because some features on this print are as small as hair and I'm not even joking. Here are some pictures, the link to the video is at the bottom. The printing parameters are in the video description.

    https://drive.google.com/open?id=0B6...VBDVTdyX0UyOTQ

    https://drive.google.com/open?id=0B6...Ep6dHZEemxKanc

    https://drive.google.com/open?id=0B6...0ZTVTRrRGRLZjg

    https://drive.google.com/open?id=0B6...G1KLXpZMkItcHc

    https://drive.google.com/open?id=0B6...HdRM0FaMWZGS1k

    https://drive.google.com/open?id=0B6...0hSVUhtN1p3ekU

    Here is the timelapse and video overview of this print, enjoy!
    https://www.youtube.com/watch?v=DEq-8Sm_yS0

  2. #2
    Super Moderator Geoff's Avatar
    Join Date
    Nov 2013
    Location
    NSW, Australia
    Posts
    1,824
    Add Geoff on Thingiverse
    nice, but looks like the print had some issues , What happened here?
    owch.JPG
    Hex3D - 3D Printing and Design http://www.hex3d.com

  3. #3
    Good observation, that was actually where one of the blobs from the background exposure attached to the print. It deformed that portion and kept it from printing properly. I really wasn't impressed with maker juice resin and I'll probably avoid using it in the future.

  4. #4
    Quote Originally Posted by Garage Science View Post
    Good observation, that was actually where one of the blobs from the background exposure attached to the print. It deformed that portion and kept it from printing properly. I really wasn't impressed with maker juice resin and I'll probably avoid using it in the future.
    I agree about this

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •