Hi Everyone,

Just thought we would share with you are latest design which is for a 3D printed iPhone bumper for an iPhone 6/6S Plus. The bumpers print and then immediately fit straight onto your phone straight off the bed. They are held on via friction fit. This is more than adequate to stay attached to your phone but also provides a quick way of removing the bumpers when needed. The bumpers offer a great amount of protection and look good as well.

We printed out bumpers in our own Blue ABS filament which is available here: http://www.3dexfilament.co.uk/product.php?id=14 We used a layer height of 0.2mm and an infill of 20%, however, it doesn't matter what settings you use as this design will yield good results regardless of the printer settings.

Please check out our website for more free downloadable designs and all of your filament needs:
http://www.3dexfilament.co.uk
You can also download the bumpers from the below sites:
https://pinshape.com/items/17275-3d-...s-plus-bumpers
https://cults3d.com/en/gadget/iphone-6-6s-plus-bumpers
http://3dfilemarket.com/vendor?vendor=3dex-ltd

Please let us know what you think!

3Dex_1101.jpg3Dex_1102.jpg3Dex_1103.jpg