Hey all,

I'm pretty new to the 3D printing scene. I got myself a Makerfarm Pegasus 10" a little over a month ago and have been having awesome prints up until a few days ago. My prints started getting very stringy and thin on the solid infill layers and also having weird "disconnects" (for lack of a better term) which results in blobbing and misshaped higher layers. I've attached a picture that kind of shows what I am talking about. You can see down around the lower hole how the surface layer isn't completely solid and has small gaps where the extrusion got thin. It is a little more visible in actuality, the picture doesn't really show the full extent of it. I'm almost positive that it's just something I have changed and screwed up. This printer has been excellent since I first got it assembled. I'm not exactly sure whats causing it though, and I would like any advice that you might have for me. Thanks!

Makerfarm Pegasus 10"
Dual e3D-litev6 hotends
Just PLA so far (Hatchbox, 3D Solutech)
Aluminum Heated Bed with Buildtak surface

Edit - forgot to attach the picture D:
IMAG0151.jpg