Results 1 to 10 of 12
Thread: Technical Information Resources
-
11-23-2015, 10:37 AM #1
Technical Information Resources
Suppose someone wanted to really read the technical aspects of 3D printing rather than the basics...someone with too much time on their hands
For example, a full indepth discussion of infill, layer height and virtually all the parameters involved in 3D printing.
Is there a good place to go to read up on all those technical aspects and the effect they have on printing?
-
11-23-2015, 10:43 AM #2
http://reprap.org/wiki/Print_Trouble...ictorial_Guide
http://support.3dverkstan.se/article...shooting-guide
https://www.simplify3d.com/support/p...oubleshooting/
https://all3dp.com/common-3d-printin...eir-solutions/
https://ultimaker.com/en/support/vis...shooting-guide
...
I'm sure your google-fu is adequate.
http://manual.slic3r.org is as good a place to start as any.
-
11-23-2015, 11:48 AM #3
Thanks Davo
I've had trouble with Google for about a year now. I have to use Yahoo search, which is not quite as good as Google search.
Not one single Google link works for me. When I click, nothing happens. Sometimes I can copy the link into the browser but Google's links are all so freaking advertising and tracking loaded they usually don't work anyway. bummer.
This is typical.....
https: //www. google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&u act=8&sqi=2&ved=0ahUKEwiNwZTqgafJAhXDSSYKHYgQC8cQF gg3MAA&url=http%3A%2F%2F3dprinting.com%2Fwhat-is-3d-printing%2F&usg=AFQjCNGY5rg0R4Hiq82oRpX4t_1dTWehKA &sig2=tGb_yQptL-IdLbiL0cKZQw&bvm=bv.108194040,d.eWELast edited by Ward; 11-23-2015 at 11:55 AM.
-
11-23-2015, 12:29 PM #4
Curious. Those should get you started.
-
11-23-2015, 12:47 PM #5
Look at this one....
http://softsolder.com/2013/03/14/g-c...d-master-list/
-
08-09-2017, 08:44 AM #6
- Join Date
- Jun 2017
- Posts
- 23
Thanks for the links. Sure, you can Google stuff, but I like having community suggested information as well sometimes. Especially for when you stumble into some interesting information you weren't specifically looking for.
-
06-18-2018, 03:41 PM #7
- Join Date
- Jun 2018
- Posts
- 1
Good information is handled by friends and links. It is important to take into account what is mentioned here, in order to guarantee a better impression and not have any type of inconvenience in the process. I would also like to share with you lovers of 3d my website https://www.stlfinder.com/ where I have a variety of downloadable models that can be used for your impressions ..! with more than 2.5 million 3D models indexed from a wide variety of repositories on the Internet, a platform as a useful tool for all those looking for digital models ..! I hope to help you in something
-
11-01-2018, 11:42 PM #8
- Join Date
- Oct 2018
- Location
- United States
- Posts
- 1
Very Informative
-
11-14-2018, 09:18 PM #9
- Join Date
- Nov 2018
- Posts
- 6
Much obliged for the connections. Of course, you can Google stuff, however I like having a network recommended data too now and then. Particularly for when you bumble into some intriguing data you weren't particularly searching for.
-
12-29-2018, 06:53 AM #10
- Join Date
- Dec 2018
- Posts
- 1
Good information.
New $139 Kossel Linear on ebay?!?
02-13-2019, 10:46 AM in 3D Printers (Hardware)