Close



Results 1 to 2 of 2
  1. #1

    Sticking button dealing with the flash forge creator 2 FIX

    I recently bought a flashforge from amazon and immediately noticed the annoying sticking four way buttons and thought to myself, "there has to be a better way". Instead of filling the wood down to fit the buttons, one can simply pull the buttons outwards with a pair of needle nose pliers, separate the outer clear plastic from the inner blue plastic and reinstall the button back without the clear outer plastic. the button just snaps back in place no problem. It looks factory, functions much better with no binding, and you dont have to do anything permanent to the machine. have fun!

  2. #2
    Super Moderator Geoff's Avatar
    Join Date
    Nov 2013
    Location
    NSW, Australia
    Posts
    1,824
    Add Geoff on Thingiverse
    There is a few LCD extenders on thingiverse, also button panel extenders. I removed my entire button panel and printed out one thats slanted at 45' as I couldnt read the text on the blue LCD at certain angles

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •