Close



Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23
  1. #11
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,139
    Some more stuff that came out recently. The elephant was designed by LEFABSHOP. Very nice design, really well engineered for 3dprint, with articulated limbs and head.
    The gear is a handout I'm preparing for an industry outreach to young students in poor neighbourhoods : D-impulse.

    IMG_20150901_071148.jpg

    IMG_20150901_081302.jpg

  2. #12
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,139
    This one was designed by INTENTIONAL3D, and it's really well made : prints in one go without support. Very fun to see it being made.
    2015-09-22 07.04.16.jpg2015-09-22 07.04.46.jpg

  3. #13
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,139

  4. #14
    Student wachuko's Avatar
    Join Date
    Aug 2015
    Location
    Orlando, FL USA
    Posts
    38
    Quote Originally Posted by LambdaFF View Post
    This one was designed by INTENTIONAL3D, and it's really well made : prints in one go without support. Very fun to see it being made.
    2015-09-22 07.04.16.jpg2015-09-22 07.04.46.jpg
    Available for download?

  5. #15
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,139

  6. #16
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,139
    Some more stuff done recently. Looong prints (well, for me at least), both well over the 18 hours mark.

    Vice design by Spanner hands, I designed the kitchenette.

    IMG_20151110_193613.jpg IMG_20151101_095006.jpg

  7. #17
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    kitchenette - what does it do ?

    gear wise - you'd be better off printing the moving encapsulated ones: http://www.thingiverse.com/thing:53451
    set it to a 0.3mm gap in the .scad file and it pops off the printbed and spins amazingly well.

    going to have to try that expanding platform thing :-)

  8. #18
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,139
    Quote Originally Posted by curious aardvark View Post
    kitchenette - what does it do ?
    It's just a little something for my 2 year old to play kitchen with... It's a play oven with a play hotplate and an exhaust hood.

    Quote Originally Posted by curious aardvark View Post
    gear wise - you'd be better off printing the moving encapsulated ones: http://www.thingiverse.com/thing:53451
    set it to a 0.3mm gap in the .scad file and it pops off the printbed and spins amazingly well.
    As I said, it's a dead project. Was supposed to be a handout representing some of core compentencies here to students from poor neighboorhoods. Too bad it won't be used. Anyway, functionality was not required (especially if I had to make 60+ in a couple of weeks).

    The jack was really fun.

  9. #19
    Staff Engineer LambdaFF's Avatar
    Join Date
    Jan 2014
    Location
    France, Aix en Provence
    Posts
    1,139
    A prototype barge model I'm working on. Will be 1m long : 1/100 scale.
    IMG_20151221_114224.jpg
    Also printed that crazy digital sundial from MOJO 3D :
    IMG_20151129_122649.jpg

  10. #20
    The kitchenette rocks. Amazing quality from the PMP!


Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •