Post your scans here !

[Nerv]

I'll put together a detailed procedure and post it on our website soon.

Regards,
Dave @ NERV
www.NervIndustries.com

[Budschinger]

ok, great!

[Budschinger]

Can't find any further information on your website!?

You used SolidWorks? Which Software? Which Add-Ins?

Thank you....

[3DWP]

@Nerv Hi Dave, hope to see some tips soon. You seem to have lots of experience with the Einscan, thanks for all the info and help.

[3DWP]

I'll put together a detailed procedure and post it on our website soon.

Regards,
Dave @ NERV
www.NervIndustries.com

I used the contact form to ask but no reply.. Asked again for a tutorial.

Are you there Dave?

[bitsmisin]

Also interested in a tutorial. I can manual scan and auto align in one rotational plane, but as soon as I flip it (to get missing data), it can't figure it out. Maybe I need an intermediate rotation to allow it to understand. Works for natural shapes as there is little symmetry but a uniform shape it struggles.

Also, is the scan to scale? It is hard to tell. Any good way to orientate correctly once in meshmixer? This is all new but exciting!

[3DWP]

I'll put together a detailed procedure and post it on our website soon.

Regards,
Dave @ NERV
www.NervIndustries.com

Dave/Nerv isn't responding, guess he doesn't want to share the tutorial anymore..

I saw software version 1.7.3 is out, downloading now. Did people use it already?

[This]

I have been scanning with 1.7.3 for a few days works great, but I only have the Einscan-s also for a few days.
it is giving my iMac and Win scan laptop a workout, these files are huge

And here are my first test scans

The Catwoman head is a little smaller the a life size head.



The Rancor is about 5cm in height.

[3DWP]

I have been scanning with 1.7.3 for a few days works great, but I only have the Einscan-s also for a few days.
it is giving my iMac and Win scan laptop a workout, these files are huge

And here are my first test scans

The Catwoman head is a little smaller the a life size head.



The Rancor is about 5cm in height.

Wow, nice scans! I am scanning right now with 1.7.3 but my objects are a bit shiny so not too successfull. I have sprayed them with chalk, helps a bit. I'll try some matte figurines later.

[This]

I also noticed that the surface is very important to get a good scan,
white or light gray and matte as possible, and one uniform color, and especially no black or dark colors.

I guess some hairspray should also dull the surface a lot, and is easily removable.

I looked into some special spray cans, that spray a matte white powder on the surface that can be brushed off.
http://www.laserdesign.com/3d-scan-spray/
https://www.igo3d.com/en/3d-coating-spray.html